FT 5000-FT2000 - OZNET



Go to content

Main menu:

Hardware > Yaesu > HF - 6M

   

 
FT DX 5000 HF/50 MHz 200W Transceiver Series

   The FT DX 5000 Series HF/50 MHz 200 Watt Transceivers are a new Premium Class of Yaesu radios with 2 Independent Receivers plus many unique options and accessories designed to meet the Performance Requirements of even the most demanding serious Amateur Radio operator.



  
FT DX 5000 Brief Description

       SM-5000 Station Monitor – Optional; 300 Hz Roofing Filter – Optional; ±0.5ppm TXCO – Included.

   FT DX 5000D Brief Description

       SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Optional; ±0.5ppm TXCO – Included.

   FT DX 5000MP Brief Description

       SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.

   Rugged 200 Watt Output Power

       The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).

   Internal Power Supply

       All three FTDX 5000 Series radios have their own built-in power supply

   TWO Totally Independent Receivers

       All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.

   SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)

       SSB (2.4kHz BW)
       10 kHz SEP.:106 dB, IP3 +40 dBm


       CW (500Hz BW)
       10 kHz SEP:112 dB, IP3 +40 dBm
       2 kHz SEP. :105 dB, IP3 +36 dBm
       1 kHz SEP. : 99 dB, IP3 +25 dBm


       *VFO-A/Main Receiver @ 14 MHz, IPO1

   Super Sharp “Roofing” Filters

       Super sharp “Roofing” filters for VFO-A/Main Receiver.
       Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)

       *300 Hz filter is optional for FTDX 5000 and FTDX 5000D. It is included in the FTDX 5000MP

   High Performance Yaesu Custom-designed 32-bit Floating Point DSP

       The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.

   Variable CW Audio Peak Filter & High/Low-Cut Filtering

       Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.

       - CW Width: 50/100/150/200/250/300/350/400/450/500 Hz

       - CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)

   True Analog Meter Precision

       Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.

   New Function Displays for Ease of Operation

       Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.

   IF Output Available

       IF Output (9 MHz) from VFO-A/Main Receiver

   Practical Level Indication System for Most Important Settings

       The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.

       -They can be controlled ON/OFF independently!

   Introducing the SM-5000 Station Monitor Bandscope

       If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!

   Other Valuable Options

       - Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
       - Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)

   Amateur Radio \ Brochures \ HF/Satellite Transceivers and Amps

         FT Dx 5000 Sales Brochures  ( 9.51 MB )
         FTDX5000D Product Review (December 2010 QST @ ARRL)  ( 0.99 MB )
   Amateur Radio \ Manuals \ HF/Satellite Transceivers and Amps

         DMU-2000 Operating Manual (3/18/10)  ( 2.23 MB )
         FTdx5000 Series CAT Operation Reference Book  ( 242.99 KB )
         FTdx5000 Series Operating Manual  ( 9.57 MB )
         SM-5000 Station Monitor Operating Manual  ( 557.33 KB )
   Amateur Radio \ Software

         DMU-2000 Update Software Information (3-16-10)  ( 111.45 KB )
         DMU-2000 Update Software V008-sys/V421-app (2-25-10)  ( 25.72 MB )
         DMU-2000 Update Software V009-sys/V511-app (2-25-10)  ( 25.73 MB )
         FTdx5000 Update Software with new Main V0114 and EDSP V0530 (2/18/11)  ( 1.98 MB )
         FTdx5000 Update Software Information (2/18/11)  ( 558.73 KB )




The Yaesu SM-5000 station monitor adds sophistication and new capabilities to your FTDX-5000. It allows you to see a visual display of an amateur band segment tuned by the VFO-A receiver. The default bandwidth allows you to see both weak and strong signals clearly depicted on the screen. During transmission the transmitter's waveform will be displayed. Three different trace modes are selectable The LBWS - Limited Bandwidth Sweep function provides very high speed signal detection over a limited portion of the currently displayed spectrum.

The SM-500 also has an enhanced stereo speaker system with superb audio quality.

The front panel controls allow you to adjust the contrast, select speaker input, or mute speakers. Special side mounting plates are provided to secure this device to the top of the FTDX-5000. The SM-5000 can be used with, or without the DMU-2000 (sold separately).

18.5 x 1.8 x 7.2 inches 5.5 lbs. (462x45x181mm 2.5kg). This device is included with FTDX-5000D and FTDX-5000MP versions only.



The three new models will be:
FT-DX 5000MP    ± 0,05 ppm TCXO | 300 Hz roofing filter | Including SM-5000 matching station monitor, with stereo speaker system
  
FT-DX 5000D    ± 0,5 ppm TCXO | Including SM-5000 matching station monitor, with stereo speaker system |  Option: 300 Hz roofing filter
  
FT-DX 5000    ± 0,5 ppm TCXO | Options: SM-5000 matching station monitor, with stereo speaker system; 300 Hz roofing filter











   

FT-2000 100 WATT & FT-2000D 200 WATT HF+6 TRANSCEIVERS

   Now includes additional features of PEP200-Performance Enhancement Program
   The FT-2000 and FT-2000D are the 2nd Generation in the proud lineage of the FTdx9000 Series! Featuring extensive DSP filtering, 100 & 200 Watts of power output respectively, and a host of outstanding ergonomic and performance features, the FT-2000 and FT-2000D are destined to be the centerpiece of your HF/50 MHz station!


   160 - 6 Meter Coverage, 100 or 200 Watts of Power!
       The FT-2000 and FT-2000D provide a full 100 & 200 Watts of power output (AM: 25 W) on the 160-6 Meter Amateur bands, and the U.S. version includes a special memory bank containing the five 60-meter channels, as well.
       Continuous receiver coverage from 30 kHz to 60 MHz is provided.
       Note: frequency coverage may differ in your country.
   Extensive Receiver DSP Filtering!
       The power of IF Digital Signal Processing (DSP) is yours to enjoy with the FT-2000/D. Variable IF Width and IF Shift allow precise interference rejection, and the receiver DSP also includes an Auto-Notch, Manual Notch, Digital Noise Reduction, and a continuously-variable passband Contour control.
       The WIDTH control has a mode-determined adjustment range of 200 Hz – 4 kHz for SSB, and 25 Hz to 2.4 kHz on CW, and a mode-optimized “Narrow” key provides one-touch narrowing of the bandwidth to a user-determined preset value.
   User-Adjustable Variable TX Bandwidth!

       With the FT-2000/D, you have tremendous control over the fidelity and/or “talk power” of your SSB signal, thanks to the variable SSB bandwidth capability in the Menu. The default bandwidth is 2.4 kHz (300 – 2400 Hz @ -6 dB), but you also have selections of 50 – 3000 Hz, 100 – 2900 Hz, 200 – 2800 Hz, and 400 – 2600 Hz, allowing you to select the bandwidth best suiting your operating needs.
   3-Band Parametric Microphone Equalizer!

       The power of DSP also provides tremendous benefits for transmission, as well as reception. The Three-Band Parametric Microphone Equalizer allows unmatched capability to tailor your speech characteristics: in each of the three bands, you may adjust the center frequency of the equalization, the frequency spread over which the equalization is applied, and the amplitude (peaking or nulling) within that equalization range. The result is sparkling, clear audio that will be the envy of everyone else on the band!
   Outstanding Strong-Signal-Handling Capabilities Derived from the FTDX9000!

       Following in the renowned path of the FTDX9000, the FT-2000/D is crafted with a comprehensive design view that accounts for all aspects of the strong signal environment, and especially with optimization of weak-signal in a multiple-strong-signal environment.
       The receiver of the FT-2000/D is a triple-conversion type, utilizing great care in the gain distribution through all IF stages. The first mixer is a GaAs FET Doubly-Balanced Mixer type, fed by a four-VCO PLL synthesizer (30 kHz – 10.5 MHz, 10.5 MHz – 24 MHz, 24 MHz – 39 MHz, and 39 MHz – 56 MHz). The resulting first IF is at 69.450 MHz, utilizing an up-conversion technique that yields excellent image rejection.
   FTDX9000-Lineage Triple Roofing Filter System for Crowded Bands (Main Band VFO)
       The first IF of the FT-2000/D features three roofing filters, I bandwidths of 15 kHz, 6 kHz, and 3 kHz, optimized by mode for best performance on today’s crowded bands. Especially useful during busy contest weekends, the Roofing Filters are positioned right after the first mixer, improving IP3 (3rd-Order Intercept Point) performance for all stages that follow.
   The Ultimate Low-Band DXer RF Preselection Filter: YAESU’s Exclusive µ-Tuning!
       On the lower Amateur bands, the signal voltages impinging on a receiver can create noise and Intermodulation effects that can cover up weak signals you’re trying to pull through. So YAESU’s engineers developed the µ (Mu) Tuning system for the FTDX9000, and it’s now available as an option for the FT-2000/D. Three modules are available (MTU-160, MTU-80/40, MTU-30/20), and these modules may be connected externally with no internal modification required! When µ-Tuning is engaged, the standard VRF (Variable RF Preselector) system is bypassed, but the fixed Bandpass Filters are still in the received signal path.
       The µ-Tuning filters utilize a stack of large 1.1” (28 mm) Ni-Zn Ferrite cores, driven through a silver-plated coil assembly by a precision stepper motor. The resulting high Q (typically over 300) provides a very steep resonance peak near your operating frequency. The peak may be adjusted away from your frequency, for even greater protection from a specific station, and a graphical depiction of the µ-Tune filter alignment appears on the front panel of the transceiver.
   Unique Receiver Configuration Display
       When operating at a frantic pace, it’s a comfort to have such comprehensive information available on the front panel’s huge display. The FT-2000/D’s unique "Receiver Configuration Display” calls out status for each step in the receiver’s RF and IF, and the fluorescent display also provides both graphical and numerical depiction of the bandwidth and the alignment of the various interference-rejection filters. And the high-resolution analog multi-meter allows you to monitor PO/COMP/SWR/ID/VDD/ALC both effortlessly and precisely.
   Dual Receive Capability for Effortless Split Operation
       During Split operation, Dual Receive may be engaged so that you may listen to both sides of the pile-up (or watch a particular frequency on the same band for activity). One push of the appropriate [TX] or [RX] indicator will engage or disengage the receiver or transmitter on the Main or Sub VFO, and the [TXW] (TX Watch) button also lets you listen to your transmit frequency during casual Split operation. The Sub Receiver also has a slot for an optional Collins® Mechanical CW filter, if desired: choose the YF-122C (500 Hz) or the YF-122CN (300 Hz). The Sub Receiver is an analog type, with no DSP filters.
   Enhance Operation using External Display (option)!
       A wide array of informative and useful displays, identical to those available on the FTDX9000D, can be obtained by adding the optional DMU-2000 Data Management Unit and an after-market display (not supplied). You get an Audio Scope (plus “Waterfall”) and Oscilloscope, Logging Page, Band Scope, World Clock with Sunrise/Sunset Terminator Display, Swept-frequency SWR display, Memory Channel listing, Rotator Control display with Great Circle Map, and a comprehensive Menu listing, as well. Enjoy the ultimate in operating ease by adding the DMU-2000!
   Five-Group, 99-Channel memory with 5-Channel Quick Memory Bank (QMB)
       The 99 memories may be organized into up to five memory groups (up to 20 channels each), and with the addition of the optional DMU-2000 Data Management Unit, you can connect your keyboard (not supplied) and add memory labels (names), edit data, and perform backup and other functions, as well, using an external computer monitor (not supplied).
       In addition, the one-touch Store (STO) and Recall (RCL) keys allow you instant access to a five-channel Quick Memory Bank that gives you access to five frequencies on a first-in, first-out running basis.
   A Host of Features for the CW Enthusiast!
       The front and rear panels have their own key jacks, which may be set up independently for connection of a keyer paddle (for use with the internal keyer), a straight key or bug, or a computer-driven keying interface for use with contest logging software, etc.
       With the FT-2000/D, you can use both your ears and your eyes to zero in on another CW station. The CW SPOT switch engages a spotting tone that matches the offset of your transmitted signal (as set by the CW Pitch selection), allowing you to match that pitch to that of an incoming signal perfectly. And the CW Tuning Indicator provides a graphical depiction of the tuning process, with a ? marker lighting up when the incoming signal is precisely aligned with yours.
   Five-Channel Digital Voice Memory and 15-Second Digital RX Recorder
       For storage and playback of repetitive messages you have to transmit in a contest, the four-channel Digital Voice Recorder (5 channels when using the optional FH-2 Keypad) will quickly and efficiently let you store CQ, Contest Number, and “QRZ” messages. On receive, a running 15-second loop recorder lets you stop the recording and play back the just-received audio, so you can confirm a callsign, for example.
   Huge Precision Main Tuning Dual!
       The front panel’s oversized 2.67” (68 mm) Main Tuning Knob is crafted using a brass JISC3604R alloy, for easy flywheel-effect frequency excursions or precision tuning of weak digital signals. The torque of the tuning knob shaft may be adjusted for just the amount of drag you prefer, and all it will take is one spin of the dial for you to know that you are in command of a serious radio!
   Built-in 100-Memory Automatic Antenna Tuner
       The 100 memories of matching-point data allow you to tune around the bands without the need to re-tune as you go. The special antenna tuner memories ensure efficient operation, as well as lightning-fast matching at new operating frequencies, as needed.
       The Automatic Antenna Tuner has a matching range of 16.7 to 150 Ohms (50 MHz: 25 - 100 Ohms).
   Personal Computer Control Softwre Available for Free Download!
       Just go to the "Files" tab in this area, and look for the "PCC-2000-E" Zip File. Download it for free, and enjoy your "virtual front panel" of the FT-2000/D on your computer screen.
   And Much, Much More. . .
       Flexible Connection Points for RTTY, SSTV, PSK31, JT65 (EME) and other Digital Modes; VOX (Automatic voice-operated TX/RX control); All mode Squelch; FM Mode: 50-Tone CTCSS Encode/Decode System; Band-Specific Repeater Shifts for 29/50 MHz FM; Wide/Narrow modes for AM and FM; Flexible, easy-to-use VFO/Memory command selections: A>B, A=B, V/M, M>A, A>M; Memory Channel Offset Tuning (MT); Versatile Scanning Capability; Versatile Menu Mode for customization of setup and features; Transverter Jack; Constant-level rear-panel sound recording jack; Comprehensive external RS-232C computer control (CAT) protocol; Optional FH-2 Keypad provides ease of control for CW or Voice Messages and Receiver Loop recording.

   Model    Description          
   FT-2000 100W PKG-1    FT-2000 100W PKG-1          
   FT-2000D 200W PKG-1    FT-2000D 200W PKG-1          
   Model                  
   Filters     
   YF-122C    Collins CW Filter 500 Hz, 7-pole               
   YF-122CN    Collins CW Filter, 300 Hz, 7-pole               
   Microphones     
   MD-100A8X    Desktop Microphone    [Click to view larger image]          
   MD-200A8X    Desktop Microphone               
   Miscellaneous     
   DMU-2000 Data Management Unit    DMU-2000 Data Management Unit               
   FH-2 Remote Control Keypad    FH-2 Remote Control Keypad               
   Signaling     
   RF Mu-Tuning Kit A 160m band    RF Mu-Tuning Kit A 160m band               
   RF Mu-Tuning Kit B 80/40m band    RF Mu-Tuning Kit B 80/40m band               
   RF Mu-Tuning Kit C 30/20m band    RF Mu-Tuning Kit C 30/20m band               
   Speakers     
   SP-2000 Speaker    SP-2000 Speaker               
   Amateur Radio \ Brochures \ HF/Satellite Transceivers and Amps

         FT-2000 Brochure  ( 11.43 MB )
   Amateur Radio \ Manuals \ HF/Satellite Transceivers and Amps

         DMU-2000 Operating Manual (3/18/10)  ( 2.23 MB )
         FT-2000 CAT Operation Reference Book (12/29/08)  ( 369.64 KB )
         FT-2000 French Operating Manual  ( 6.99 MB )
         FT-2000 Operating Manual  ( 6.21 MB )
         FT-2000D Operating Manual  ( 7.22 MB )
         RF uTuning Kit Installation Manual  ( 1.09 MB )
         RF uTuning Kit Operating Manual  ( 371.96 KB )
   Amateur Radio \ Software

         DMU-2000 Update Software Information (3-16-10)  ( 111.45 KB )
         DMU-2000 Update Software V008-sys/V421-app (2-25-10)  ( 25.72 MB )
         DMU-2000 Update Software V009-sys/V511-app (2-25-10)  ( 25.73 MB )
         FT-2000/D “PEP2000” Update V0152 and V11.54 Information (8/26/10)  ( 300.96 KB )
         FT-2000/D “PEP2000” Update Software V0152 and V11.54 (8/26/10)  ( 965.07 KB )
         PCC-2000 Software V1.42a and Reference Manual (2/24/10)  ( 1.27 MB )

Hjem | Amatør sider | Klub Sider | Udlandske | Digital | Ham OZ | Hardware | Kontakt | General Site Map
Back to content | Back to main menu