Go to content

Main menu:


Introducing the new Icom IC-7410 HF/6M base station
Icom UK
are pleased to announce the launch of the IC-7410 Amateur Radio base station.
The new IC-7410 from Icom has been designed as a specialised HF/6M transceiver sporting excellent performance and features and brings superior DSP speed and capability to a rig that’s priced and designed for everyday use.

The IC-7410 employs a high grade DSP unit and double conversion super-heterodyne system developed from the latest technology found in Icom rigs including the IC-7600, IC-7700 and IC-7800 series.
In addition, the Icom IC-7410 HF/6M Base Station Transceiver has a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz). When operated with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent and unwanted strong signal interference. Like the IC-7600, the IC-7410 features an impressive +30dBm third-order intercept point (IP3) in 14MHz.
Today’s Amateurs often combines the capabilities of a transceiver with a PC to maximize operating speed, efficiency and enjoyment. The IC-7410 comes with a standard type B USB connector on its back panel. Modulation input, audio output, RTTY demodulator output and CIV command can be controlled via the USB cable. Also, a conventional CI-V remote control jack is built in to the IC-7410.
The IC-7410 is ruggedly built, with an impressive, one-piece cast aluminium heat sink to efficiently dissipate heat. A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). The IC-7410 is available from Monday 11th April 2011 at a suggested retail price of £1999.99 (inc.VAT) and is available from authorised Icom Amateur Radio dealers.
Icom IC-7410 HF/6M Base Station Transceiver

K6TD & K6TU Contest Knob is now FlexControl!

With grateful thanks to all for their patience and to FlexRadio Systems for taking on the production and sales, we’re delighted to say that the K6TD & K6TU Tuning Knob – with full software support by Steve K5FR in DDUTIL is now going to be the FlexRadio Systems FlexControl.

You can see a picture of the FlexControl on Stu’s blog at:

If you are going to be at the International DX Convention in Visalia this coming weekend, you’ll be able to see it and try it for yourself!
See you at Visalia!

FlexRadio Systems website

Hjem | Amatør sider | Klub Sider | Udlandske | Digital | Ham OZ | Hardware | Kontakt | General Site Map
Back to content | Back to main menu